Yetter 2967-180 Residue Manager for 2959 Offset Injection Manuel d'utilisateur télécharger pdf (Page 18)

TROUBLESHOOTING

Figure A. (Correct)

Figure B. (Incorrect)

Figure A. – The planter frame is 20” off the ground. To ensure this, visually check to see that the planter

boxes are level and that the planter unit parallel arms are also parallel with the ground. When using

planter attachments located in front of the planter unit, this setting is very important.

Figure B. – The planter hitch is set too low while the planter remains at 20” off the ground. Notice from the

illustration that the unit mounted coulter is running deeper in the ground.

Note – Both illustrations are strictly for reference only. They are intended to show that proper adjustment of

the hitch height is crucial. Consult your planter operator’s manual for the proper height adjustment of the

hitch.

Note – The drawbar extension kit (6600-128) offered by Yetter Mfg. Co. may be used to alleviate the

condition shown in figure B.

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Yetter 2967-180 Residue Manager for 2959 Offset Injection Manuel d'utilisateur Page 18