Yetter 2000 Series AllSteer Plus Fertilizer Toolbar Manuel d'utilisateur télécharger pdf (Page 51)

TROUBLESHOOTING

Problem Cause Solution

Setting coulter depth equally Frame not set correctly Ensure that in operation

the frame is level.

Blade not penetrating Insufficient coulter spring Tighten coulter spring

pressure. locknut down 1” further.

Coulter incorrectly installed Adjust height of coulter by

sliding shank down at the

clamp kit.

Spring not deflecting Excessive spring pressure Back off coulter spring

locknut.

Blade not rotating Bearings too tight See maintenance section

for proper bearing adjustment

1 2 ... 46 47 48 49 50 51 52

Pas de commentaire

Yetter 2000 Series AllSteer Plus Fertilizer Toolbar Manuel d'utilisateur Page 51